Pure Spa hot tubs
This help guide will show you the correct operation of the filter / heater unit and cover any common error codes to get you back up and running.
Inline RCD Turn on
- Make sure the power cord is plugged in and the mains power is on.
- Press the reset button on the RCD.
- Turn on the spa control panel.
Delux Control Panel Functions
Once powered-up, the temp displays the current water temperature automatically.
Common Error Codes
E90 - No water flow - Turn off the spa by pressing the reset button on the online RCD and the remove and clean the filter. Once cleaned replace the filter and turn the spa back on.
E81 - No power to the spa unit - Make sure the mains power is on and press the reset button on the RCD. Then turn the spa back on
Standard Control Panel Functions
Once powered-up, the temp displays the current water temperature automatically.
Common Error Codes
E90 - No water flow - Turn off the spa by pressing the reset button on the online RCD and the remove and clean the filter. Once cleaned replace the filter and turn the spa back on.
Please Note:
- With the heating system starting, the filtration system will start working together.
- After turning off the heating system, the filtration system will still work.
- If the bubble function is active, the filtration and heating functions cannot be activated.
Still having an issue get in touch
[gravityform id="1" title="false"]